
Overview
and History of PRIMOMED 100 (Methenolone Enanthate)
Metenolone enanthate,
or methenolone enanthate, sold under the trade name Primobolan / PRIMOMED
100 (Methenolone Enanthate). Injectable
Primobolan
is called Methenolone Enanthate, while the oral format is known as Methenolone
Acetate. PRIMOMED
100 (Methenolone Enanthate) is a high-quality anabolic steroid
which is available as an oil-based
injectable form. Together with Trenbolone,
PRIMOMED
100 (Methenolone Enanthate) is the
most popular injectable anabolic androgenic steroid (AAS) for cutting cycles.
PRIMOMED
100 (Methenolone Enanthate) is often compared to
a similar anabolic steroid, ANAVAMED
10 (Oxandrolone). Both steroids are
considered very ‘mild’ in regards to potential side effects. But the difference between these
two steroids is very big – ANAVAMED
10 (Oxandrolone) possesses
a far greater anabolic strength rating than PRIMOMED
100 (Methenolone Enanthate).
PRIMOMED
100 (Methenolone Enanthate) is considered a fairly
weak steroid, weaker in fact, than
Testosterone itself. It's anabolic/androgenic ratings are very low – it possesses an anabolic rating of 88, and its
androgenic strength rating is approximately 44 – 57. At the same time, PRIMOMED
100 (Methenolone Enanthate) has a huge advantage over most steroids, because that is
stronger than testosterone at binding to the androgen receptor. It is a fantastic steroid which can be used as
the main compound in cutting cycles and it's a good aid for fat loss. PRIMOMED
100 (Methenolone Enanthate) is a favorite choice of many competitive
bodybuilders.
Primobolan/PRIMOMED
100 (Methenolone Enanthate) has always been identified as a European
steroid. That was first released in 1960.
Squibb introduced the drug to the
American market in 1962. The product was marketed under the brand name Nibal
Depot (for the injectable) and Nibal for the oral variant dosed at 20mg per
tablet. Later that year the rights for manufacture of the compound were sold to
Schering in West Germany (now Bayer). Schering started to sell it under the
Primobolan trade name. Soon Nibal was removed
from the US market and never returned as a commercial product. Schering
now had exclusive patent rights and consumers had naturally come to identify
this anabolic steroid as a product of
Schering. Although Primobolan/PRIMOMED
100 (Methenolone Enanthate) was
never marketed in the United States after Schering had bought the rights to it,
it is still listed as an FDA approved drug. This fact had enabled American
doctors to be able to import it on special order.
PRIMOMED
100 (Methenolone Enanthate) can be used within the medical field by individuals suffering from conditions in which
muscle wasting and severe weight loss is a symptom. This steroid has
also been used as an immunostimulant for
individuals fighting infections, wasting conditions, an adjunct to countering
the effects of prolonged corticosteroid therapy, and the treatment of
osteoporosis as well as sarcopenia (the loss of muscle as correlated with
aging). The same like ANAVAMED
10 (Oxandrolone), PRIMOMED
100 (Methenolone Enanthate) is
proven to be so mild in its negative effects that it has also been utilized in
children and infants in order to promote weight gain in prematurely born
infants without any indications of ill effects or toxicity. PRIMOMED
100 (Methenolone Enanthate) is one of the few
anabolic steroids that have zero risks of any Estrogenic side effects. Also,
its very weak androgenic strength rating lowers the risk of the potential
androgenic side effects.
Chemical
Characteristics of PRIMOMED 100 (Methenolone Enanthate)
Primobolan/PRIMOMED
100 (Methenolone Enanthate) is
a Dihydrotestosterone (DHT) derivative.
It contains one additional double bond between carbons 1 and 2 in the Dihydrotestosterone structure. This helps
to stabilize the 3-keto group and increase
the anabolic strength of the hormone. A 1-methyl group is also added to the
hormone, which protects the steroid against hepatic metabolism and breakdown. The injectable format (Methenolone
Enanthate) in particular is simply Methenolone with the Enanthate ester bound
to the Methenolone chemical structure. ‘Enanthate’ is Enanthoic acid (also
known as carboxylic acid), but once bound to Methenolone it is properly
referred to in chemistry as an ester bond (or ester linkage). Enanthoic acid is
attached to the 17-beta-hydroxyl group
on the Methenolone structure. The addition of this ester augments the hormone’s
release rate and half-life to favor a longer window of release. As soon as Methenolone
Enanthate enters the bloodstream, enzymes work to break the bond between the
ester and the hormone, which takes a varying amount of time. This results that
when the ester is removed from the hormone by these enzymes, the pure
Methenolone is free to do its work in the body. When the Enanthate ester is
attached to Methenolone, creating Methenolone Enanthate, the half-life of PRIMOMED
100 (Methenolone Enanthate) is now extended to
10 days, providing a slower release and activity of the hormone.
Properties
of PRIMOMED 100 (Methenolone Enanthate)
Being a DHT-derivative, PRIMOMED
100 (Methenolone Enanthate) holds many of the
same properties as its parent hormone. It is not aromatized by the aromatase
enzyme into Estrogen at any dose, meaning you won't need an
aromatase inhibitor (AI) or SERM with it. Besides, the user should never
experience any Estrogen related side effects while using the PRIMOMED
100 (Methenolone Enanthate) alone. This means that it completely
avoids the potential for any of the following side effects: water retention and
bloating, elevated blood pressure (as a result of water retention), possible
fat gain/retention, and gynecomastia. Because of its poor anabolic strength
rating, which is lower in strength than TESTOMED
E 250 (Testosterone Enanthate), PRIMOMED
100 (Methenolone Enanthate) is not preferred by athletes or
bodybuilders for bulking cycles, lean mass cycles, or for any measurable
strength gain. That is best to combine PRIMOMED
100 (Methenolone Enanthate) with
other anabolic steroids as well, whether utilizing it for a cutting cycle or a
bulking or lean mass cycle. Many anabolic steroid users claim that the use of PRIMOMED
100 (Methenolone Enanthate) alone is a useless practice because it is useful only at very high doses. Choose PRIMOMED
100 (Methenolone Enanthate) if you are looking for increased strength, enhanced muscular
endurance, and recovery in the cutting cycle, where the goal is losing body fat
while maintaining muscle mass.
PRIMOMED
100 (Methenolone Enanthate) Side Effects
PRIMOMED
100 (Methenolone Enanthate) is a DHT-derivative and it carries
many similar properties and characteristics, including the inability to convert
(aromatize) into Estrogen at any dose used. This is a very important fact to
most users who are worried about Estrogenic side effects, such as bloating,
gynecomastia, high blood pressure as a result of water retention, etc. PRIMOMED
100 (Methenolone Enanthate) is often regarded by athletes and bodybuilders as being a ‘mild’ and safe anabolic steroid in
comparison to other products. If used in small clinical doses (20-25 mg daily) PRIMOMED
100 (Methenolone Enanthate) is described as having a low impact on
endogenous testosterone production and HPTA function, attention should be paid
if it is used for physique or performance-enhancing purposes. In one study,
more than half of the patients receiving only 30-45 mg per day noticed a 15-65%
suppression of gonadotropin levels. It is recommended
to perform a proper PCT (Post Cycle Therapy) following the discontinuation of
PRIMOMED 100 (Methenolone Enanthate).
PRIMOMED
100 (Methenolone Enanthate) Cycles and Use
PRIMOMED
100 (Methenolone Enanthate) cycles are commonly
in the form of fat loss and/or cutting cycles. This steroid is almost never
used as a bulking or mass-gaining agent, but it is a great solution to use as a
pre-contest drug in the final weeks leading up to a competition show or photo
shoot. Many bodybuilders often combine PRIMOMED
100 (Methenolone Enanthate) with other compounds
that hold similar qualities, properties, and half-lives. It is typically cycled
with TESTOMED
P 100 (Testosterone Propionate)(or
TESTOMED
E 250 (Testosterone Enanthate))
and use it for the first 8 weeks of a cycle in order to assist in the retention
of muscle mass during periods of low caloric intake. PRIMOMED
100 (Methenolone Enanthate) can be run in cycle
lengths of 10 – 12 weeks (or longer, depending on the individual’s goals and
desires).
Dosages
and Administration of PRIMOMED 100 (Methenolone Enanthate)
As
mentioned previously, in order to get good results fairly high doses of PRIMOMED
100 (Methenolone Enanthate) should be used. For men, injectable dosages should be
600-800mgs per week or higher. For women, that is recommended to use only oral
Primobolan. Medical prescription dosages of PRIMOMED
100 (Methenolone Enanthate) outline 200mg as a
first dosage, followed with 100mg every week for the complete duration of
therapy. Depending on the medical condition of the patient the right dosage of PRIMOMED
100 (Methenolone Enanthate) is determined. The dosage can range
anywhere from 100mg every one or two weeks to 200mg every two to three weeks.
Beginner dosages of PRIMOMED
100 (Methenolone Enanthate) for bodybuilders and athletes
normally start at about 400mg per week. Intermediate PRIMOMED
100 (Methenolone Enanthate) dosages are usually in the range of
400 – 700mg per week, which should be adequate enough, and advanced users may
venture as high as 800 – 1,000mg per week. Female PRIMOMED
100 (Methenolone Enanthate) dosages in terms of safety and minimal
virilization are usually in the range of 50 – 100mg per week. Injectable PRIMOMED
100 (Methenolone Enanthate) tends to be used far less frequently
by females than the oral variant, which is the preferred form for ladies.
Injectable PRIMOMED
100 (Methenolone Enanthate) exhibits a half-life
of 7 – 10 days due to the Enanthate ester and should be administered twice per
week, with each injection spaced evenly apart, in order to maintain stable and
steady blood plasma levels.
Chemical
info / Information
Primobolan (Methenolone)
Chemical
Name: 17beta-Hydroxy-1-methyl-5alpha-androst-1-en-3-one,
1-methyl-1(5-alpha)-androsten-3-one-17b-ol
Molecular Weight: 414.621 g/mol
Formula: C27H42O3
Original Manufacturer: Squibb
Elimination half-life: 10 days (Enanthate), 2 – 3 days (oral)
Detection Time: 4 – 5 weeks
Anabolic Rating: 88
Leave a Comment